Data Sheet
Table Of Contents
IN / PWY
100%
70%
EN
DESCRIPTION
Stabilized DC power supply is intended for supply CCTV cameras that require stabilised voltage of 12V DC. The unit
has a cable with a DC5.5/2.1 plug. When connected to fuse blocks of the LB4/xx/xx or LB8/xx/xx family, the power supply
unit can feed more cameras (max. 4 or 8). The unit is protected against short-circuit and overload.
TECHNICAL DATA
PSD12070
CODE:
TYPE:
PSD 12V/7A Desktop type power supply for CCTV
ACCESORIES
ACCESORIES :
[1] adapter CABLE - PLUG DC 5,5/2,1 - code ML109
For power supplies are available
accessories - fuse blocks and cable adapter.
For details –visit .www.pulsar.pl
Graph 1.
Relation between output current and ambient
temperature (instantaneous load).
Fig.1 Dimension of power supply.
wyjście TAMPER : przewody 30cm
Tel. +48 14-610-19-40, fax: +48 14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
PSD series power supply
Desktop type power supply 12V DC
Pulsar
®
v1.0/XI
Features of the power supply:
· power output 7A/12VDC*
· universal AC input voltage range
90÷264V
· high efficiency 87%
· standby power <0,5W
· efficiency level: V
· protections:
· SCP short-circuit protection
· overvoltage protection (AC input)
· overload (OLP)
· warranty – 2 year from the production date
Supply voltage 90 ÷ 264V AC 50÷60Hz
Current consumption 0,9A@230V AC max.
Supply power 84W max.
Efficiency 87%
Output voltage 12V DC
Output current t
AMB
<30°C 7A - refer to graph 1.
Output current t
AMB
=40°C 5A - refer to graph 1.
Ripple voltage 100mV p-p max.
Short-circuit protection SCP electronic, automatic recovery
Overload protection OLP 105-150% of power supply, automatic recovery
Operation conditions temperature -10
o
C÷40
o
C
relative humidity 20%...90%, without condensation
Dimensions (LxWxH) 175 x 72 (100) x45 [mm]
Net/gross weight 0,48kg / 0,55kg
Protection class PN-EN 60950-1:2007 II (second)
Lenght of DC cable 1,45m + plug DC5,5/2,1 female
Lenght of AC cable 1,15m + mains plug
Storage temperature -20ºC...+60ºC
* Refer to graph 1
* In order to extend the life of the power supply, the load current of 5A is recommended.