Data Sheet

PSB-12V3A v1.0/I
PSB 13,8V/3A enclosed, switch mode buffer power supply
PSB series power supply
Enclosed, switch mode buffer power supply 13,8 V DC
Pulsar
®
Features of the power supply:
· DC 13,8 V/3 A uninterruptible power supply
· high efficiency 87%
· controlling of battery charging and maintaining
· protecting of battery against excessive
discharging (UVP)
· battery charging current 0,5 A
· optional equipment: set of external LED
indicators: PKAZ168, mounting plate DIN1
· battery output is full protected against
short-circuit and reverse connection
· LED optical signalisation
· protections:
· short-circuit protection SCP
· over voltage protection OVP
· surge protection
· overload protection OLP
· warranty – 2 year from production date
Supply voltage ~ 200 – 240 V; 0,5 A; 50/60 Hz
Inrush current 40 A
Supply power 48 W
Efficiency 87%
Output voltage (factory settings) 11-13,8 V DC – buffer operation
9,5-13,8 V DC – battery operation
Output current 3,5 A
Battery charging current
0,5 A
Voltage adjustment range 13,5 – 14,4 V DC
Current consumption by PSU during battery-assisted
operation
approx. 35 mA
Ripple voltage 100mV p-p max.
Short-circuit protection SCP electronic, automatic recovery
Overload protection OLP 105-150% PSU power, automatically recovered
Overload protection (battery) OLP polymer fuse
Surge protection varistors
Overvoltage protection OVP
>19 V (activation requires disconnecting the load or supply
for about approx. 1 min.)
Excessive discharge protection UVP U<9,5 V (± 5%) – disconnection of battery
Optical signalisation LED green – indicates DC voltage at the power
LED optical indication output (intended for optional
indication set PKAZ168)
LED AC – presence of AC voltage
LED DC – presence of DC voltage on power supply output
LED CHARGE – battery charging process
Optional equipment A set for optical indication LED PKAZ168
Operation conditions 2-nd enviromental class, temperature: -10
o
C÷40
o
C
relative humidity 20%...90%, without condensation
Dimensions L=110, W= 78, H=36 [±2mm]
Net/gross weight 0,25 / 0,27 [kg]
Protection class electric shock protection I (first) - requires a protective conductor
Declarations, warranty CE, 2 year from the production date
Connectors
I/O PCB: 0,5 – 2,5 mm
2
(AWG 26 – 12)
output of optical signalization: 4 pins micromatch socket
Additional accessories Battery wires 6,3F – 45cm, ML062 angle muff (hole 5,2mm)
CODE:
TYPE:
EN
Tel. [phone], fax: [phone], www.pulsar.pl, e- mail: [e-mail]
DESCRIPTION
Buffer-type power supply units are intended for continuous power supply to devices that require stabilised
voltage of 12 V DC (+/-15%). The power supply provides a voltage of U=13,8 V DC with an output current of:
Output current of 3 A + 0,5 A battery charging
In case of power voltage decay, prompt switching to battery supply occurs. The power supply unit is protected
against a short circuit, an overload, a surge or over voltage protection.
TECHNICAL DATA