Installation Guide

Operation
16
Starting the Generator Set
Ground Terminal
Before using generator, a ground wire must be connected to the ground terminal.
The Ground terminal is located on the Front Panel. Before using the ground terminal consult a
qualified electrician.
Ground Terminal Symbol:
The 7750Watt dual fuel generator can be started using the following method. Recoil Start
Method,
Electronic Start Method
IF USING PROPANE FUEL SOURCE
1.Connect the gas pipe to the intake nozzle of regulator;
2. Open the valve of LPG bottle;
3.Turn the fuel selector to “LPG” position;
4. Push the engine switch to “ON” position;
5. Close the choke.
6.Continue to desired start-up method.
IF USING PROPANE FUEL SOURCE
1.The battery must be properly connected to the generator and check the battery voltage is
normal.
2.Turn on fuel valve.
3.Close the choke.
4. Push the engine switch to “ON” position
5. Turn the fuel selector to “GAS” position.
6.Continue to desired start-up method.