Owners manual

PRE-OPERATION CHECK

Engine Oil

Engine oil is a major factor affecting engine performance and

service life. Non-detergent and 2-stroke engine oils will damage

the engine and are not recommended.

 Check the oil level BEFORE EACH USE with the

generator on a level surface and the engine stopped.

 Use 4-stroke motor oil that meets or exceeds the

requirements for API service classification SJ.

Always check the API SERVICE label on the oil container to be sure it includes the letter SJ.

 SAE 10W-30 is recommended for general, all-temperature use. Other viscosities shown in the

chart may be used when the average temperature in your area is within the indicated range.

1 Remove the oil filler cap and wipe the dipstick clean.

2 Check the oil level by inserting the dipstick into the filler neck without screwing it in.

3 If the level is low, fill to the top of the oil filler neck with the recommended oil.

Fuel

 Check the fuel gauge, and refill the tank if the fuel level is low.

 Refuel carefully to avoid spilling fuel. Do not fill above the shoulder of the fuel strainer.

Wheel Kit Installation

1. Fit two wheels and two handles to the

2. Before starting generator, press the lock

system of wheels and handles to prevent

generator with lolts and nuts.

displacement during the work time.