Warranty

18
MAINTENANCE
Regular maintenance will extend the life of this generator and improve its performance. The warranty does not
cover items that result from operator negligence, misuse, or abuse. To receive full value from the warranty,
operator must use the generator as instructed in this manual, including proper storage.
Before inspecting or servicing this machine, make sure the engine is off and no parts are
moving. Disconnect the spark plug wire and move it away from the spark plug.
WARNING!
If you are unsure of how to perform a maintenance task, have the unit serviced by an
CAUTION!
authorized PULSAR dealer.
CAUTION!
Pre-Operation Steps
Before starting the engine, perform the following pre-operation steps:
• Check the engine oil and the fuel tank level.
• Make sure the air filter is clean.
• Remove any debris that has collected on the generator and around the muffler and controls. Use a vacuum cleaner to
pick up loose debris. If dirt is caked on, use a soft bristle brush.
• Inspect the work area for hazards.
After Each Use
• Turn
the FUEL VALVE Knob to “OFF”
• Switch
OFF the engine
• Switch Off the battery
• Wait for the generator
to become cool to
the touch
• Store
unit in a
clean
and dry area.
Only use specified PULSAR replacement parts.
Maintenance Schedule
After First 5 Hours Change Oil
After 8 Hours or Daily Clean Debris from Generator and Air Filter area
Check Engine Oil Level
Annually (25 hr Use) Check and Clean Air Cleaner
Inspect Muffler and Spark Arrester
Annually (100 hr Use) Service Spark Plug (Replace with NGK BP6ES, Champion N9YC or equivalent)
Inspect Fuel Valve and Fuel Lines for leaks or damage
Inspect Muffler and Spark Arrester
Check and Clean Air Cleaner Assembly, Replace Air Filter
Clean Cooling System Cylinder Head Fins and Flywheel Fan
Change Engine Oil after the first 25 hours, again at 50 hours; then every 100
hours thereafter.