Data Sheet

P.-TR1HD v.1.1/III
P- TR1HD Set of passive video transmitters with BNC plug on the cableHD
CODE:
TYPE:
DESCRIPTION
The P-TR1HD is a set of passive devices for video transmission using twisted-pair cable. These elements match
the impedance of the coaxial cable (75Ω) to the impedance of the symmetrical cable (100Ω).
In order to obtain the best quality of transmission and interference resistance the UTP cable Cat. 5 (or higher) is
recommended. When connecting, make sure that the transmission uses cables from the same twisted pair and properly
connect the cables to the screw terminals, "+" to "+" and "-" to "-".
Improper connection will result in image distortion.
The P-TR1HD is ended with BNC plug on the cable. Such design allows easy connection of these elements to devices,
where the sockets are arranged close to each other.
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Set of passive video HD transmitters with BNC plug on the cable
TECHNICAL DATA
Fig. 1. Video image transmission using twisted-pair cable.
Pulsar
®
The video signal
1,0V
p-p
, 75Ω
Video transmission range
HD-CVI
720p 400m
1080p 230m
3 / 4 / 8 Mpx 160m
HD-TVI
720p 200m
1080p 200m
3 / 4 / 5 / 8 Mpx 180m
AHD
720p 320m
1080p 200m
3 / 4 / 5 / 8 Mpx 180m
CVBS 960H 400m
Video bandwidth
0 ... 50 MHz (-3 dB)
Impedance of the coaxial connector / connector type
75 Ω / BNC plug (using the 100mm cable)
Impedance of the unbalanced connector / connector type
100 Ω / screw terminals
Attenuation (loop-through)
-0,5dB / 5MHz
CMRR
60dB / 5MHz
Operation temperature
-20°C ÷ 55°C
Storage temperature
-40°C ÷ 60°C
Permissible relative humidity
<95%
Dimensions
15 × 20 × 52 mm
(with cable - 170mm length)
Net / gross weight
0,04kg
Declarations, warranty
CE, one year from the production date
WEEE MARK
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted
municipal waste and to collect such WEEE separately.