Operation Manual

English

NOTES ON USING THE WATCH

TIME/CALENDAR MODE

[DIGITAL TIME/CALENDAR SETTING]

● The calendar automatically adjusts for odd and even months including February of leap

years up to 2050.

● Once the year, month and date have been set, the day of the week is automatically set.

● Setting the second

To reset the second digits to “00,” press either button C or D in accordance with a time

signal while the second digits are flashing. If button C or D is pressed while the second

digits count any number between “30” and “59,” one minute is added and the seconds

digits are immediately reset to “00.”

● 12-/24-hour indication setting

• When the 12-hour indication is selected, “AM” indicator appears for the morning and

“PM” indicator appears from the afternoon.

• When setting the hour digits in the 12-hour indication, check that the AM/PM is

properly set.

● The flashing digits except for second and 12-/24-hour indication move quickly if button

C or D is kept pressed.

● If the watch is left untouched in the TIME/CALENDAR SETTING display with the digits/

item flashing, it will automatically return to the TIME/CALENDAR mode in 1 to 2

minutes.

How to cancel the single-time alarm

The display shows “ - : - “ indicating

that the single-time alarm has been

cancelled.

How to stop the single-time alarm manually while sounding

The single-time alarm sounds for 20 seconds at the designated time and

automatically stops. To stop the single-time alarm manually while sounding,

press any of buttons A, B, C, or D.

Doing this in any display can stop the alarm.

The single-time alarm will be automatically cancelled once it sounds at the designated

time.

and

C D

Press buttons C and D at the

same time.

Press four times to show SINGLE-

TIME ALARM mode.