CAL.
CROWN/BUTTONS AND DISPLAYS Day Illuminating light Day C B Minute hand B Minute hand Illuminating light C a Hour hand b Second hand b a: normal position b: extended position (analogue time setting) CROWN Second hand a: normal position b: extended position (analogue time setting) A D Mode change Second A D Mode change Hour English English CROWN a Hour hand Second Minute [Caliber NX14] Hour Minute [Caliber NX11] 2 The caliber NX11 and NX14 have the different designs of digital dis
A With each press, the mode in the digital display changes in the following order: ➡ TIME/ CALENDAR ➡ STOPWATCH ➡ TIMER ➡ REGULAR ALARM ➡ SINGLE-TIME ALARM 4 B Unlocking the crown 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out. Press in any mode to turn the illuminating light on. The built-in electroluminescent backlight illuminates the display for approximately 3 seconds for easy viewing in darkness.
TIME/CALENDAR MODE DIGITAL TIME/CALENDAR SETTING City code • The analogue and digital displays are separately illustrated in the following sections of this manual for the purpose of explanation. B A C The city code currently selected will flash at the top half. ANALOGUE TIME SETTING CROWN 2 3 6 Turn to set the hour and minute hands to the correct time. Push back simultaneously with a time signal.
CHOICE OF DISPLAY IN TIME/CALENDAR MODE "HOME CITY" SETTING ● Pressing button D in TIME/CALENDAR mode will change the calendar element shown at the top half of the display. ● Pressing and holding button D for 2 to 3 seconds in TIME/CALENDAR mode will select the item shown at the top and bottom halves of the display.
"HOME" mark C or D C A D and A D Press both at the same time. Beneath the city code which you have selected, the “HOME” mark appears. Press to confirm the setting and return to TIME/CALENDAR mode. WORLD TIME FUNCTION ● Time in the 77 cities and regions around the world can be displayed. Among those 77 cities, the cities in some time zones with 30-minute offsets from UTC are included. ● Daylight saving time can also be set.
DAYLIGHT SAVING TIME SETTING B C RETURNING TO THE "HOME CITY" DISPLAY C Press and hold for 2 to 3 seconds. C C The city code whose time the watch is currently showing will flash. Press and hold for 2 to 3 seconds. The city code whose time the watch is currently showing will flash. 12 Daylight saving time mark • While the daylight saving time mark appears on the display, the time is advanced by one hour in all the cities.
CITIES AND TIME DIFFERENCES UTC = coordinated universal time City code City name 14 UTC LON CAS BCN MAD PAR AMS FRA MUC BER ZRH MIL ROM CPH STO UTC London Casablanca Barcelona Madrid Paris Amsterdam Frankfurt Munich Berlin Zurich Milan Rome Copenhagen Stockholm Country or region Universal Coordinated Time The United Kingdom Morocco Spain Spain France The Netherlands Germany Germany Germany Switzerland Italy Italy Denmark Sweden Time difference Daylight saving time/ from UTC US time (hour) zone abbr.
16 SGN JKT KUL SIN HKG PEK SHA TPE MNL PER FNJ SEL SPK SDJ KIJ TYO NGO OSA Ho Chi Minh City Jakarta Kuala Lumpur Singapore Hong Kong Beijing Shanghai Taipei Manila Perth Pyongyang Seoul Sapporo Sendai Niigata Tokyo Nagoya Osaka Country or region Vietnam Indonesia Malaysia Singapore China China China Taiwan Philippines Australia North Korea South Korea Japan Japan Japan Japan Japan Japan Time difference Daylight saving time/ from UTC US time (hour) zone abbr.
ATL MIA NYC YTO SCL BUE SAO RIO PDL Atlanta Miami New York Toronto Santiago Buenos Aires São Paulo Rio de Janeiro Azores Country or region The United States The United States The United States Canada Chile Argentina Brazil Brazil Azores Time difference Daylight saving time/ from UTC US time (hour) zone abbr. –5 –5 –5 –5 –4.5 –3 –3 –3 –1 EST EST EST EST • The use of daylight saving time or a time different from UTC may change in some regions or countries as determined by each country.
TIMER OPERATION TIMER MODE Start/Stop/Restart ● The timer can be set up to 9 hours and 59 minutes in 1-minute increments. ● When the set time is up, it beeps for 10 seconds. TIMER SETTING A Press twice to show TIMER mode. A Press and hold for 2 to 3 seconds to show TIMER SETTING display. B Press to select the item to be adjusted (flashing). C C Press to start or stop the timer. Pressing button C will alternately start or stop the timer.
C REGULAR ALARM MODE ● The regular alarm sounds once every 24 hours. ● You can preview the alarm sound by using the sound demonstration function. ● The hourly time signal can also be set. A Press three times to show REGULAR ALARM mode. A Regular alarm mark Press to set the flashing digits. Press to confirm the alarm setting. The regular alarm mark will be automatically displayed indicating that the regular alarm is engaged.
Sound Demonstration Function (Alarm sound preview) To preview the alarm sound, press button C for 2 to 3 seconds in the REGULAR ALARM mode. The alarm sound can be heard while the button is kept pressed. SINGLE-TIME ALARM MODE ● The Single-Time Alarm sounds only once at a designated time and it is disengaged automatically. Using this function will reverse the regular alarm setting. Reset the alarm by pressing button C. SINGLE-TIME ALARM mode mark English A D Press to activate the hourly time signal.
How to cancel the single-time alarm C NOTES ON USING THE WATCH A Press four times to show SINGLETIME ALARM mode. and D TIME/CALENDAR MODE [DIGITAL TIME/CALENDAR SETTING] C D The display shows “ - : - “ indicating that the single-time alarm has been cancelled. How to stop the single-time alarm manually while sounding The single-time alarm sounds for 20 seconds at the designated time and automatically stops. To stop the single-time alarm manually while sounding, press any of buttons A, B, C, or D.
REGULAR ALARM MODE ● Even if the STOPWATCH mode is changed to a different mode while the measurement is in progress, it continues counting properly. After the stopwatch is used, however, be sure to stop it as the battery energy is consumed enormously to shorten the battery life. [REGULAR ALARM SETTING] ● The flashing digits move quickly if button C or D is kept pressed.
BATTERY CHANGE 2 ● ● ● ● ● 30 Battery life : Approx. 2 years Battery : SEIKO SR626SW, 1 piece (for analogue display) SEIKO SR41W, 1 piece (for digital display) The battery life may be less than 2 years if the alarm is used for more than 10 seconds a day and/or the illuminating light more than once (for 3 seconds) a day. Even if either of the two batteries has run down, replace both of them with new ones.
TO PRESERVE THE QUALITY OF YOUR WATCH ● Non-water resistant If “WATER RESISTANT” is not inscribed on the case back, your watch is not water resistant, and care should be taken not to get it wet as water may damage the movement. If the watch becomes wet, we suggest that you have it checked by an AUTHORIZED PULSAR DEALER or SERVICE CENTER.
MAGNETISM 34 SHOCKS & VIBRATION Light activities will not affect your watch, but be careful not to drop your watch or hit it against hard surfaces, as this may cause damage. CARE OF CASE AND BRACELET To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth. PERIODIC CHECK It is recommended that the watch be checked once every 2 to 3 years.
