Data Sheet

MSRK 2012 v.1.0/IV
MSRK 13,8V/2A/OC buffer, switch mode power supply module
.with technical outputs
BATTERY
12V, SLA
MSRK2012
TRANSFORMER
230V/18V÷22V
AC STATUS
CONTROL
e.g. LED
indication
RECEIVER
12V/DC
(10V÷14V/DC)
detectors, cameras
signalling dev.,
locks
UVP
DESCRIPTION
A buffer PSU module is intended for an uninterrupted supply to devices requiring stabilised voltage of 12V DC (+/-
15%). The PSU module provides voltage of 13,8V DC with current capacity:
1. Output current 2A + 0,2A battery charge
2. Output current 1,7A + 0,5A battery charge
Total device current + battery: 2,2A max.
In case of power failure, a battery back-up is activated immediately.
EN**
CODE:
TYPE:
MSRK series power supply module
Buffer switch mode power supply module 13,8V DC with technical outputs
Pulsar
®
Features:
· DC 13,8V/2A uninterruptible power supply
· high efficiency 89%
· low voltage ripple
· battery charging and maintenance control
· excessive discharging (UVP) protection
· battery output full protection against short-circuit
and reverse polarity connection
· jumper selectable battery charge current
0,2A/0,5A
· START facility for manual battery connection
· LED indication
· EPS technical output indicating AC power loss
– OC type
· PSU technical output indicating PSU failure – OC type
· LoB technical output indicating battery low voltage
– OC type
· adjustable times indicating AC power failure
· protections:
· SCP short-circuit protection
· OLP overload protection
· OHP overheat protection
· overvoltage protection
· warranty – 5 year from the production date
Tel. [phone], Fax. [phone], www.pulsar.pl, e-mail: [e-mail]
W
L
H