Operation Manual

English
2
English
3
■ HOW TO START THE MECHANICAL WATCH
CROWN
1 Pull out to the first click.
■ TIME/CALENDAR SETTING FOR MODELS WITH DATE CALENDAR
To initially start your watch, swing it from side to side in a horizontal arc for
about 30 seconds.
* If the watch is worn daily, PULSAR’s automatic mechanism will wind the
mainspring automatically through normal wrist movement.
* If the watch is used without being wound up sufficiently, gain or loss of the watch
may result. To avoid this, wear the watch for more than 8 hours a day.
■ TIME SETTING FOR MODELS WITHOUT CALENDAR
CROWN
1 Pull out to the second click.
2 Turn to set the time.
3 Push back in to normal position.
MECHANICAL WATCHES
■ SCREW DOWN CROWN [for models with screw down crown]
1 Turn Crown counterclockwise until you no
longer feel the threads turning.
2 Crown can be pulled out.
Unlocking the crown
1 Push Crown back in to normal position.
2 Turn Crown clockwise while pressing it lightly
until tight.
Locking the crown
* When using the watch in water:
Before using the watch in water, be sure the crown is screwed in completely.
Do not operate the crown when the watch is wet or in water.
HOW TO USE THE WATCH
MECHANICAL_E 09.6.18, 2:17 PM2-3