Data Sheet

ISFG64 v.1.0/II
Industrial switch ISFG64 (4xPoE, 2xSFP)
CODE
TYPE
:
:
DESCRIPTION
ISFG64 is a 6-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 4 ports of the
switch. UP LINK ports (marked 5 and 6) are used to connect further network devices using fiber optics (using
SFP modules - GBIC). On front panel there is LEDs signaling of the device's status (description in table below).
Device has solutions that allow it to be powered from two sources (emergency power supply, redundant power
supply) – in case of a failure of one source, it immediately switches to backup one.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router.
EN
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Industrial switch ISFG64 (4xPoE, 2xSFP)
Ports
4 ports 10/100/1000 Mb/s (PoE)
2 ports 100/1000 Mb/s (UP LINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802. 3af/at (1÷4 ports), 52 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
12 Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Power supply
Switch: 12-57 V DC; 2 A max.
PoE: 48-57 V DC; 2 A max.
Self-power consumption
5 W max.
Operating conditions
temperature -30°C ÷ 70°C,
relative humidity 5% - 90%, no condensation
Dimensions
W=30, H=128, H
1
=10, D=112, D
1
=8 [+/- 2 mm]
Net/gross weight
0,3 / 0,4kg
Protection class
EN 60950-1:2007
I (first)
Storage temperatur
-30°C ÷ 70°C
Declarations, warranty
CE, 2 year from the production date
Features:
· 6 ports industrial switch
4 PoE ports 10/100/1000 Mb/s (1÷2 ports) (data and power
supply)
2 ports 100/1000 Mb/s SFP
· 30 W for each PoE port, supports devices complaint with the
IEEE802.3af/at (PoE+) standard
· Supports auto-learning and auto-aging of MAC addresses
(8K size)
· Possibility of redundant power supply
· Mounting on a DIN rail (TH35)
· LED indication
· warranty – 2 year from the production date
TECHNICAL PARAMETERS
Pulsar
®
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 96 W.