User Instructions

ManualsBrandsPulsar ManualsOtherISF108

ISF108

v1.0

Industrial switch ISF108 (8xPoE, 2xCombo)

Edition: 1 z dnia 16.01.2020

Supercedes the edition: --------------- EN

Features:

 10 ports switch

8 PoE ports 10/100Mb/s, (1÷8 ports) (data and power

supply)

2 ports 10/100/1000Mb/s (G1/TP, G2/TP ports ) (UpLink)

2 ports 10/100/1000Mb/s SFP (G1/SFP, G2/SFP ports)

 30 W for each PoE port, supports devices complaint with

the IEEE802.3af/at standard

 Supports auto-learning and auto-aging of MAC addresses

(16K size)

 Possibility of redundant power supply

 Mounting on a DIN rail (TH35)

 LED indication

 warranty – 2 year from the production date

Example of use.

1. Technical description

1.1. General description.

ISF108 is a 10-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.

Automatic detection of any devices powered in the PoE standard is enabled at the 1 – 8 ports of the switch. The G1/TP and

G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots (marked as

G1/SFP and G2/SFP), the use of fiber optic module (GBIC) allows fiber optic transmission. Device has solutions that allow it to

be powered from two sources (emergency power supply, redundant power supply) – in case of a failure of one source, it

immediately switches to backup one.

The LEDs at the front panel indicate the operation status (description in the table 3). The PoE technology ensures a

network connection and reduces installation costs by eliminating the need to supply a separate power cable for each device.

This method allows supplying other network devices, such as IP phone, wireless access point or router.

Summary of content (5 pages)

PAGE 1
ISF108 v1.0 Industrial switch ISF108 (8xPoE, 2xCombo) Edition: 1 z dnia 16.01.2020 Supercedes the edition: --------------- PL EN Features:    10 ports switch 8 PoE ports 10/100Mb/s, (1÷8 ports) (data and power supply) 2 ports 10/100/1000Mb/s (G1/TP, G2/TP ports ) (UpLink) 2 ports 10/100/1000Mb/s SFP (G1/SFP, G2/SFP ports) 30 W for each PoE port, supports devices complaint with the IEEE802.
PAGE 2
1.2 Block diagram. Fig. 1. Block diagram. 1.3 Description of components and connectors. Table 1. (See Fig. 2) Component No. (Fig. 2) [1] [2] [3] [4] [5] Description 8 x PoE ports (1÷8) 2 x UPLINK ports (G1/TP, G2/TP) 2 x UPLINK ports (G1/SFP, G2/SFP) Power Socket (V1/V2) Holder for DIN rail Fig. 2. The view of the switch.
PAGE 3
1.4 Technical parameters Table 2. PoE power supply Protocols, Standards Bandwidth 8 x PoE (10/100 Mb/s) (RJ-45) 2 x UPLINK (10/100/1000 Mb/s) (RJ-45) 2 x UPLINK (10/100/1000 Mb/s) (SFP) with connection speed auto-negotiation and MDI/MDIX Auto Cross) IEEE 802. 3af/at (1÷8 ports), 52 V DC / 30 W at each port * IEEE802.3, 802.3u, 802.
PAGE 4
Connection schemes 3. Operation indication (see Table 3). Table 3. Operation indication OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY GREEN LED LIGHT (Power) Indication of the switch's power supply OFF – no power supply of the switch ON – power supply on, normal operation OPTICAL INDICATION AT THE PoE PORTS (1÷8) GREEN LED LIGHT (PoE) Indication of the PoE power supply at the RJ45 ports OFF- no power supply at the RJ45 port (the device is not connected or not compliant with the IEEE802.
PAGE 5
WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. Pulsar sp. j. Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl, sales@pulsar.pl http:// www.pulsar.pl, www.zasilacze.