Data Sheet

ISF108 v.1.0/I
Industrial switch ISF108 (8xPoE, 2xCombo)
CODE
TYPE
:
:
DESCRIPTION
The LEDs at the front panel indicate the operation status. The PoE technology ensures a network connection
and reduces installation costs by eliminating the need to supply a separate power cable for each device. This
method allows supplying other network devices, such as IP phone, wireless access point or router.
ISF108 is a 10-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.
Automatic detection of any devices powered in the PoE standard is enabled at the 1 – 8 ports of the switch. The
G1/TP and G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted
with SFP slots (marked as G1/SFP and G2/SFP), the use of fiber optic module (GBIC) allows fiber optic
transmission. Device has solutions that allow it to be powered from two sources (emergency power supply,
redundant power supply) – in case of a failure of one source, it immediately switches to backup one.
EN
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Industrial switch ISF108 (8xPoE, 2xCombo)
Ports
8 x PoE (10/100 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802. 3af/at (1÷8 ports), 52 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
5,6 Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Power supply
Switch: 12-57 V DC; 2,3 A max.
PoE: 48-57 V DC; 2,3 A max.
Self-power consumption
5 W max.
Operating conditions
temperature -30°C ÷ 70°C,
relative humidity 5% - 90%, no condensation
Dimensions
W=54, H=176, H
1
=10, D=153, D
1
=8 [+/- 2 mm]
Net/gross weight
0,9/1,1kg
Protection class
EN 60950-1:2007
I (first)
Storage temperatur
-30°C ÷ 70°C
Declarations, warranty
CE, 2 year from the production date
Features:
· 10 ports switch
8 PoE ports 10/100Mb/s, (1÷8 ports) (data and power
supply)
2 ports 10/100/1000Mb/s (G1/TP, G2/TP ports ) (UpLink)
2 ports 10/100/1000Mb/s SFP (G1/SFP, G2/SFP ports)
· 30 W for each PoE port, supports devices complaint with the
IEEE802.3af/at standard
· Supports auto-learning and auto-aging of MAC addresses
(16K size)
· Possibility of redundant power supply
· Mounting on a DIN rail (TH35)
· LED indication
· warranty – 2 year from the production date
TECHNICAL PARAMETERS
Pulsar
®
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 120 W.