Operating instructions

www.pulsar.pl INTW
10
Fig. 10. The “Wi-Fi LAN Settings” window”.
Type the SSID network identifier that has been used during router configuration. Type: „PowerSecurity” in
the „Network name” field. Configure the other settings as shown in the picture above and confirm by pressing the
„Apply” button”.
The „Apply” button cannot be omitted!
Choose the „WiFi Security Settings” tab at the bottom of the same window. Settings from this tab are
responsible for the protection against unauthorized connections.
In the „Network Authentication” and „Data Encryption” tabs, choose this method of authentication and data
encryption that is supported by the router. Mark the „WPA-PSK” and „TKIP” data encryption as they are supported
by our router. The „Open system” option can be selected in both cases.