User Instructions

www.pulsar.pl INTRE

5.3 Configuration of power supplies of the EN54 series with LCD display

The PSU fitted with LED display enables setting the communication parameters of the serial port from the

LED panel. To enter the setup mode, simultaneously press the „<,>” rightmost and leftmost buttons on the LED

panel.

- use the „>” or „<” buttons to display the PSU menu

- press the „SET” button

- use the „>” or „<” buttons to display the Transmission menu

(The Transmission menu is at the bottom of the screen)

- press the „SET” button, the prompt will appear at the end of the line

- use the „>” or „<” buttons to set the 115.2k 8E1

(if the PSU does not support this speed, choose other

maximum speed available)

- confirm by pressing the „SET” button