User Instructions

www.pulsar.pl INTRE-C
17
4.9 Interface INTRE-C – Status
Upon selection of an interface in the „Devices” tab, the „Status” tab is loaded in the browser window.
Fig. 21. View of the „Status” tab.
„Identify” button – facilitates the identification of an interface at the installation site. Upon pressing,
LED diodes flash for 5 seconds.
„Errors” button – a window appears upon pressing, displaying the current errors of the interface, if any.
4.10 Interface INTRE-C – Installation .
The picture below shows the „Information” tab. The displayed information only has a read-only status.
DATE AND TIME – date and system time of the device
SOFTWARE VERSION – control software version
S/N – serial number of the device
MAC – MAC address of the interface
Fig. 22. „Information” tab.
PSU
identification
List of errors