User Instructions

www.pulsar.pl INTR
9
4.3 Configuration of power supplies of EN54 series with LCD display
The PSU fitted with LCD display enables setting the communication parameters of the serial port
from the LCD panel. To enter the setup mode, press the „SET” button from the main screen.
4.3.1 Setting the communication address
- use the „<” or „>” buttons to display the PSU menu
- press the „SET” button
- use the „<” or „>” buttons to choose the Communication address menu
- press the „SET” button, the prompt will appear at the end of the line
- use the „<” or „>” buttons to set the address
1÷ 247 – address of the PSU during the communication with the computer
- confirm by pressing the „SET” button