User Instructions

www.pulsar.pl INTR
7
4.2 Configuration of power supplies of PSBEN series with LED display
The PSU fitted with LED display enables setting the communication parameters of the serial port
from the LED panel. To enter the setup mode, simultaneously press the „<,>” rightmost and leftmost
buttons.
4.2.1 Setting the communication address
All power supplies are factory-set to address 1
– simultaneously press the „<,>” rightmost and leftmost buttons on the LED panel
- press “OK” once the „Adr” parameter is displayed
- use the „<” or „>” buttons in order to set the address from 1 to 247.
- confirm the selected address by pressing “OK.”
- in order to return to the main menu, simultaneously press the „<,>” rightmost
and leftmost buttons