User Instructions

www.pulsar.pl INTE-C
7
Upon loading of the login page, choose the installer’s name and enter the access password.
The default settings are:
name = „installer’s”
password = „admin”.
It is recommended to change the installer’s name and the password upon the first logging.
An Ethernet module enables restoration of default logging values in case they are lost. To this end,
open the PSU casing so as to gain access to the module installed inside. Then locate the communication module
and press „INIT” for approx. 5 secs.
Fig. 6. View of the Ethernet module.
Example graph of parameters, read from the EN54C-LCD PSU:
IP address: 192.168.1.100
Installer’s level:
Name: „Instalator”
Password: „admin”
User’s level:
Name: „Użytkownik”
Password: „user”