User Instructions

www.pulsar.pl INTE-C
4
2. Components arrangement.
The figure below shows the distribution of the major components and connectors of ETHERNET INTE-C
interface.
Fig.2. The interface view.
Table 1. Description of the components.
Component
no.
Description
[1]
LEDs – optical indication:
PWR – supply voltage
LINK_ETH – Ethernet port connected
TX_PSU – data transmission
RX_PSU – receiving data
[2]
RESET button reset the interface settings
[3]
INIT button interface initialization
[4]
RJ45 ETHERNET interface socket (see Table 2)
[5]
SERIAL socket for connection with the power supply