User Instructions

www.pulsar.pl INTE-C

Features:

 connection to ETHERNET network via RJ45 connector

 permission of Scientific and Research Centre for Fire Protection – National Research Institute for use with

power supplies of EN54C-LCD series

 automatic email notifications of PSU malfunctions

 compliance with IEEE 802.3 standard

 10/100 Mb/s transmission speed

 full-duplex or half-duplex operation (auto-negotiation)

 galvanic isolation between the Ethernet interface and the power supply

 power supply via „SERIAL” socketc

 cooperation with the PowerSecurity web application

 optical indication

 warranty: 3 years from production date

1. General description.

The Ethernet INTE-C interface is intended for cooperation with PSUs of the EN54C-LCD series.

The PowerSecurity software enables remote monitoring of parameters through a cyclical preview of the current

status of the power supply, reading the event log and diagrams of currents and voltages and performing remote

battery test.

Fig.1. Schematic diagram of Ethernet network communication.

The network topology is based on the Ethernet switch (e.g. switch, router) to which subsequent PSUs with

INTE-C interfaces are connected. Each interface has a static IP address. The communication between a PC and

an end PSU takes place through entering the IP address of the interface.