User Instructions

www.pulsar.pl INTE-C
10
4.4 Power supply – Installation .
The picture below shows the „Information” tab. The displayed information only has a read-only status.
DATE AND TIME – date and system time of the device
SOFTWARE VERSION – control software version
S/N – serial number of the device
Fig. 10. „Information” tab.
4.5 Power supply – Settings
Upon selection of the „Settings” tab, selected PSU parameters may be configured. This modification is only
available upon logging in to the account as the installer.
Default login parameters on the installer’s level:
Name: „Instalator”
Password: „admin”
Fig. 12. „Settings” tab.
4.5.1 Device name.
In the „Device Name” section, a name to be identified with the PSU should be entered. The name is
recorded directly in the device’s internal memory and enables its identification, both from the level of the LCD panel
of the PSU and from the web application.
Fig. 11. Device name.
In order to confirm the introduced changes, press „Save".