User Instructions

www.pulsar.pl HPSBOC10A24C GREEN POWER plus
3
1.2 Block diagram (fig.1)
Fig.1. The block diagram of the PSU.
1.3 Description of the module’s components and connectors.
Table 1. Elements of the module’s (see fig. 2).
Element no.
Description
[1]
LED indicating presence of AC power
[2]
LED indicating presence of DC power
[3]
LED indicating correct battery voltage
[4]
EPS- AC absence technical output – relay type
[5]
PSU- output indicating DC absence/PSU failure - relay type
[6]
LoB- output indicating battery low voltage - relay type
[7]
EPS - AC absence technical output – OC type
[8]
PSU - output indicating DC absence/PSU failure - OC type
[9]
LoB - output indicating battery low voltage - OC type
[10]
Connectors PSU:
+V ,-V- DC supply output
+B, -B – battery connectors
L-N 230V AC power connector, PE protection connector
[11]
V
ADJ
- potentiometer, voltage adjustment DC
[12]
Selection jumper for charging current:
Ibat =1A, Ibat=2A Ibat=4A
Description: jumper installed, jumper removed
[13]
Battery connectors: +BAT =red, - BAT = black
[14]
LED indication on the front panel