User Instructions

www.pulsar.pl HPSB5524C GREEN POWER
5
W
H
D
1.4 Specifications:
- electrical parameters (tab.3)
- mechanical parameters (tab.4)
- operation safety (tab.5)
- operating parameters (tab.6)
Electrical parameters (tab. 3).
PSU type
A (EPS - External Power Source)
Mains supply
176÷264V AC
Current up to
1.4A@230VAC
Power frequency
50÷60Hz
Supply power
155W max.
Efficiency
83%
Output voltage
27,6V DC – buffer operation
19V÷27,6V DC – battery-assisted operation
Output current t
AMB
<30°C
5A + 0,5A battery charge - refer to chart 1
3,5A + 2A battery charge - refer to chart 1
Output current t
AMB
=40°C
3,3A + 0,5A battery charge - refer to chart 1
1,8A + 2A battery charge - refer to chart 1
Voltage adjustment range
24÷28V DC
Ripple
150mV p-p max.
Battery charge current
0,5A/2A max. @ 2x17Ah (± 5%) - jumper selectable
Short-circuit protection SCP
electronic, automatic return
Overload protection OLP
105-150% of the PSU power, automatic return
Battery circuit protection SCP and reverse
polarity connection
PTC polymer fuse
Surge protection
varistors
Overvoltage protection OVP
>32V (activation requires disconnecting the load or
supply for about 20 s.)
Excessive discharge protection UVP
U<19V (± 5%) – disconnect of connection battery
Sabotage protection:
- TAMPER indicates enclosure opening
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
LED indication:
- AC diode indicating AC power status
- AUX diode indicating DC power status at
the PSU output
- red, normal status – on, failure: off
- green, normal status – on, failure: off
Mechanical parameters (tab. 4).
Dimensions
W=400 H=350 D+D
1
=92+8 [+/- 2 mm]
W
1
=405, H
1
=355 [+/- 2 mm]
Fixation
see figure 2
Fitting battery
2x17Ah/12V (SLA) max.
360 x 170 x 85mm (WxHxD) max
Net/gross weight
3,9 / 4,2 kg
Enclosure
Steel plate DC01, thickness: 0,7mm, colour: RAL 9003
Closing
Cheese head screw x 2 (at the front), lock assembly possible
Connectors
Power-supply: Φ0,63-2,50 (AWG 22-10)
Outputs: Φ0,63-2,50 (AWG 22-10), battery output BAT: 6,3F-2,5
TAMPER output: wires
Notes
The enclosure does not touch the assembly surface so that cables can be led.
Convectional cooling.