User Instructions

ManualsBrandsPulsar Manuals27HPSB 27,6V/5A/2×17Ah buffer, switch mode power supply unit

HPSB 5524C

v.1.0

HPSB 27,6V/5A/2x17Ah

Buffer, switch mode power supply unit.

EN*

Edition: 8 from 24.10.2016

Supersedes edition: 7 from 11.08.2014

Summary of content (8 pages)

PAGE 1
HPSB 5524C v.1.0 HPSB 27,6V/5A/2x17Ah Buffer, switch mode power supply unit. EN* Edition: 8 from 24.10.2016 Supersedes edition: 7 from 11.08.
PAGE 2
www.pulsar.
PAGE 3
www.pulsar.pl HPSB5524C GREEN POWER - HPSB5524C + 2 x RN25024(27,6V/24V) + 2xLB8 16x0,3A (AWZ577 or AWZ580) + 2x17Ah 8. Buffer power supply unit HPSB 27,6V/3x5V÷18V/3x2A÷1,3A/2x17Ah. - HPSB5524C + 3xDCDC20 (3x5V÷18V) + 2x17Ah 9. Buffer power supply unit HPSB 27,6V/3x5V÷18V/3x2A÷1,3A/12x0,5A/2x17Ah. - HPSB5524C + 3xDCDC20 (3x5V÷18V) + 3xLB4 12x0,5A (AWZ574 or AWZ576) + 2x17Ah 1.2 Block diagram (fig.1) Fig.1. The block diagram of the PSU. 1.3 Description of PSU components and connectors ( tab.1, tab.
PAGE 4
www.pulsar.pl HPSB5524C Fig.2. The view of the PSU.
PAGE 5
www.pulsar.pl HPSB5524C GREEN POWER 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3). PSU type Mains supply Current up to Power frequency Supply power Efficiency Output voltage A (EPS - External Power Source) 176÷264V AC 1.4A@230VAC 50÷60Hz 155W max.
PAGE 6
www.pulsar.pl GREEN POWER HPSB5524C Operation safety (tab.5). Protection class PN-EN 60950-1:2007 Protection grade PN-EN 60529: 2002 (U) Electrical strength of insulation: - between input and output circuits of the PSU (I/P-O/P) - between input circuit and PE protection circuit (I/P-FG) - between output circuit and PE protection circuit (O/P-FG) Insulation resistance: - between input circuit and output or protection circuit I (first) IP20 3000 V/AC min. 1500 V/AC min. 500 V/AC min.
PAGE 7
www.pulsar.pl HPSB5524C GREEN POWER 2.2 Installation procedure. 1. Before installation, cut off the voltage in the 230V power-supply circuit. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230Vac) to L-N clips of the PSU. Connect the ground wire to the clip marked by the earth symbol PE (PSU module connector). Use a three-core cable (with a yellow and green PE protection wire) to make the connection.
PAGE 8
www.pulsar.pl HPSB5524C GREEN POWER WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. CAUTION! The power supply unit is adapted for cooperation with the sealed lead-acid batteries (SLA). After the operation period they must not be thrown but recycled according to the applicable law. Pulsar sp. j.