HPSB 10A24C v.1.0 HPSB 27,6V/10A/2x17Ah Buffer switch power supply unit. EN** Edition: 2 from 24.10.2016 Supercedes the edition: 1 from 18.03.
www.pulsar.
www.pulsar.pl GREEN POWER HPSB10A24C 1.2 Block diagram (fig.1) Fig.1. The block diagram of the PSU. 1.3 Description of PSU components and connectors. Table 1. Elements of the PSU. Element no. [Fig.
www.pulsar.pl HPSB10A24C GREEN POWER Fig.2. The view of the PSU. 1.4 Specifications: - electrical parameters (tab.2) - mechanical parameters (tab.3) - operation safety (tab.4) - operating parameters (tab.5) Table 2. Electrical parameters PSU type Mains supply Current up to Supply power Efficiency Power factor PF Output voltage A (EPS - External Power Source) 176÷264V AC 50Hz 1,5A@230VAC max. 276W max.
www.pulsar.pl GREEN POWER HPSB10A24C 0,5A@50V DC (max.) LED indication: - AC diode indicating AC power status - DC diode indicating DC power status at the PSU output - red, normal status – on, failure: off - green, normal status – on, failure: off Table 3. Mechanical parameters Dimensions W=400 H=350 D+D1=92+8 [+/- 2 mm] W 1=405, H1=355 [+/- 2 mm] Fixation see figure 2 Fitting battery 2x17Ah/12V (SLA) max.
www.pulsar.pl HPSB10A24C GREEN POWER Chart 1. Acceptable output current from the PSU depending on ambient temperature. 2. Installation. 2.1 Requirements. The buffer PSU shall be mounted by a qualified installer with appropriate permissions and qualifications for 230V/AC installations and low-voltage installations (required and necessary for a given country). The device shall be mounted in confined spaces, according to the environment class II, with normal air humidity (RH=90% max.
www.pulsar.pl HPSB10A24C GREEN POWER 3. Operating status indication. The PSU is equipped with two diodes on the front panel: RED LED: on – the PSU is supplied with 230V AC off – no 230V AC supply GREEN LED: on – DC voltage in the AUX output of the PSU off – no DC voltage in the AUX output of the PSU 4. Operation and use. 4.1 Overload or short circuit of the PSU output (SCP on) In case of overload, the output voltage is automatically shut off, and so is the LED indicator.
www.pulsar.pl HPSB10A24C GREEN POWER WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. CAUTION! The power supply unit is adapted for cooperation with the sealed lead-acid batteries (SLA). After the operation period they must not be thrown but recycled according to the applicable law. Pulsar sp. j.
