Data Sheet

HDMI-VGA
HDMI-VGA signal converter
v.1.0/I
CODE
TYPE:
:
DESCRIPTION
The HDMI-VGA signal converter allows connecting devices (DVRs/NVRs) equipped with HDMI sockets
to monitors using only a VGA (D-Sub) input.
The device requires power, which is supplied directly from the DVR's USB port (the cable is attached to the
converter).
In addition to the image, the converter also allows sending audio to an external source (e.g. active
speakers, audio amplifier). For this purpose, the 3.5 "mm jack is used.
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
HDMI-VGA signal converter
Code
HDMI-VGA
Video output
1 x HDMI (outlet) (HDMI 1,3) (HDCP 1,4)
Video output / supported resolutions
1 x VGA
640x480@60/72/75/85Hz;
800x600@60/72/75/85Hz
1024x768@60/70/75/85Hz; 1152x864@75Hz;
1280x720@60Hz
1280x768@60Hz; 1280x800@60Hz
1280x960@60Hz; 1280x1024@60Hz
1360x768@60Hz; 1440x1050@60Hz
1440x900@60Hz; 1680x1050@60Hz
1600x1200@60Hz; 1920x1080@60Hz
Audio output 1 x 3,5mm Jack (outlet)
Power input
1 x USB (mini) (outlet)
Operation temperature
-10°C ÷ 40°C
Storage temperature
-20°C ÷ 60°C
Attenuation
0,05dB
Permissible relative humidity
relative humidity 5÷90% without condensation
Dimensions 66 × 55 × 20mm
Net / gross weight 0,05 / 0,07kg
Declarations, warranty
CE, one year from the production date
TECHNICAL DATA
WEEE MARK
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted
municipal waste and to collect such WEEE separately.
Pulsar
®