SDS

Safety Data Sheet 
Date of Issue: April-16-2015         File No.: LY-SDS-041601 
Page 10 of 12 
This  sheet  is  provided  as  technical information  only.  The  information  and  recommendations  set  forth  are  made  in  good  faith  and 
believed  to  be  accurate  as  of  the  date  of  preparation.  SICHUAN  LIYANG INDUSTRY  CO.LTD  make no  warranty,  expressed  or 
implied, with respect to this information and disclaims all liabilities from reliance on it. 
12. Ecological Information 
Ecotoxicity:Very toxic to aquatic life with long lasting effects. 
Persistence and Degradability: No information available 
Bioaccumulation: No information available 
Other adverse effects: No information available 
13. Disposal Considerations 
13.1Waste treatment methods 
Disposal methods:   
This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR 
261). This material could become a hazardous waste if it is mixed with or otherwise comes in 
contact  with  a  hazardous  waste,  if  chemical  additions  are  made  to  this  material,  or  if  the 
material  is  processed  or  otherwise  altered.  Consult  40  CFR  261  to  determine  whether  the 
altered material is a  hazardous waste. Consult the  appropriate state, regional, or local 
regulations for additional requirements. Should not be released into the environment. 
Contaminated Packaging:   
Dispose of in accordance with federal, state and local regulations. 
California Hazardous Waste Codes 141 
This product contains one or more substances that are listed with the State of California as a 
hazardous waste. 
Chemical Name 
California Hazardous Waste 
Sulfuric acid 7664-93-9 
Toxic          Corrosive 
Lead 7439-92-1 
Toxic 
Antimony 7440-36-0 
Toxic 
14. Transportation Information 
According to IATA DGR 56th Edition for transportation, assemble articles strictly according to 
Hazardous Goods Transport Rules of Railway Station , The batteries should be securely packed 
and  protected  against  short-circuits.  Examine  whether  the  package  of  the  containers  are 
integrate  and tighten  closed before transport. Take in  a cargo of them without  falling, 
dropping, and breakage. Prevent collapse of cargo piles and wet by rain. The transport vehicle 
and  ship  must  be  cleaned  and  sterilized  otherwise  it  is  not  allowed  to  assemble  articles. 
During transport,  the vehicle should  prevent exposure, rain and  high temperature. For 
stopovers, the vehicle should be away from fire and heat sources. When transported by sea, 
the  assemble  place  should  keep  away  from  bedroom  and  kitchen,  and  isolated  from  the 
engine room, power and fire source. Under the condition of Road Transportation, the driver 
should drive in accordance with regulated route, don’t stop over in the residential area and 
congested area. Forbid to use wooden, cement for bulk transport. 










