Operating instructions

ManualsBrandsPulsar ManualsNetworkingEXT-POE3H

EXT-POE3H

v1.0

Extender EXT-POE3 in hermetic enclosure

Edition: 1 from 09.04.2018

Supersedes edition: -----------

Features:

 The output voltage range 44-57VDC

 Power from PoE switch

 The PoE IN input compliant with the IEEE802.3af/at

standard

 The PoE OUT 1/2 output compliant with the IEEE

802.3af/at standard (selectable by switch)

 Output PoE OUT 3 – passive

 Increases Ethernet and PoE power range by 100 meters

 Designed for 10Mbit/s and 100Mbit/s network

 Pole mounting option

(requires the OZB1 adapter - optional accessory)

 The possibility to turn off power to the PoE

OUT1 / 2 ports

 LED optical signalization

 protections:

 surge protection (PoE input)

 OLP overload protection

 SCP short circuit protection

 IP56 hermetic enclosure

 warranty – 1 year from the production date

Example of use.

1. Technical description.

1.1. General description.

The EXT-POE3H extender is a device designed to increase the PoE and Ethernet range by additional 100

meters using UTP Cat. 5/5e cable. The Extender can be powered using a PoE switch or another PoE-compliant device

(PoE IN input). The output voltage and data are available at the PoE OUT1 and OUT2 outputs designed for connecting

cameras or other IP devices using PoE power supply. The maximum load current is 0,4A (see Tab.2). The PoE OUT1,

PoE OUT2, PoE OUT3 port are supplied over 4/5 (+) and 7/8 (-) pairs, which, according to the Ethernet standard, are not

used for data transmission (data transmission uses 1/2 and 3/6 twisted pairs).

Summary of content (4 pages)

PAGE 1
EXT-POE3H v1.0 Extender EXT-POE3 in hermetic enclosure Edition: 1 from 09.04.2018 Supersedes edition: ----------EN Features:         The output voltage range 44-57VDC Power from PoE switch The PoE IN input compliant with the IEEE802.3af/at standard The PoE OUT 1/2 output compliant with the IEEE 802.
PAGE 2
1.2 Description components and connectors. Fig. 1. View of enclosure. Table 1. (See fig. 2) Element no. (Fig. 2) [1] [2] [3] [4] [5] [6] The PoE IN-input port LED LAN (yellow) LED PoE (green) PoE OUT 1/2 - output ports PoE OUT 3 – output port (passive) Power ON/OFF – PoE OUT1 /2 power supply jumper [7] The choice between the IEEE 802.3 af/at standard Description Fig. 2. The view of the extender.
PAGE 3
1.3. Technical parameters. Tabla 2. Supply voltage Current consumption by PSU systems Module power Output voltage Output current The PoE IN input power supply pairs The PoE OUT1/2 output power supply pairs Overload protection OLP Short circuit protection SCP LED operation indication Range of operating temperatures External dimensions Height glands The number of cable glands/ Ø cables Connectors: - IN/OUT PoE Net/gross weight Storage temperature compliant with 802.3af/at (44÷57VDC) <30mA 20W max.
PAGE 4
WEEE MARK According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such WEEE separately. Pulsar Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl, sales@pulsar.pl http:// www.pulsar.pl, www.zasilacze.