Data Sheet

EXT-POE3
Extender EXT-POE3
v1.0/I
CODE:
TYPE:
EN
The EXT-POE3 extender is a device designed to increase the PoE and Ethernet range by additional 100 meters using
UTP Cat. 5/5e cable. The Extender can be powered using a PoE switch or another PoE-compliant device (PoE IN
input The output voltage and data are available at the PoE OUT1, PoE OUT2, PoE OUT3 outputs designed for
connecting cameras or other IP devices using PoE power supply. The maximum load current is 0,6A (see Tab.1). The
PoE OUT1, PoE OUT2, PoE OUT3 ports are supplied over 4/5 (+) and 7/8 (-) pairs, which, according to the Ethernet
standard, are not used for data transmission (data transmission uses 1/2 and 3/6 twisted pairs).
TECHNICAL DATA
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
EXT-POE3
Extender EXT-POE3
Pulsar
®
Features of the power supply unit:
· The output voltage range 44-57VDC
· Power from PoE switch
· The PoE IN input compliant with the IEEE
802.3af/at standard
· The PoE OUT1/2 outputs compliant with the IEEE
802.3af/at standard (selectable by switch)
· The OUT3 PoE output – passive
· Increases Ethernet and PoE power range by 100
meters
· designed for 10Mbit/s and 100Mbit/s network
· The possibility to turn off power to the PoE
OUT1 / 2 ports
· LED optical signalization
· protections:
· surge protection (PoE input)
· OLP overload protection
· SCP short circuit protection
· warranty – 2 year from the production date
Supply voltage
compliant with 802.3af/at / (44 ÷ 57VDC)
Current consumption by PSU systems
<30mA
Module power
30W max.
Output voltage
applying power
Output current
0,6A ports PoE OUT1/2, 0,3A port PoE OUT3 (Σ=0,6A max.)
The PoE IN input power supply pairs 1/2 (+) 3/6(-)
4/5 (+) 7/8 (-)
The PoE OUT1/2 output power supply pairs 4/5 (+) 7/8 (-)
Overload protection OLP
Short circuit protection SCP
PoE OUT1/2:150% ÷ 200% of nominal output current,
automatic recovery
PoE OUT3: PTC 0,5A, polymer fuse
LED operation indication
Yellow LAN LED - indicating the LAN connection status
Green PoE LED - presence of input/output voltage
Operation conditions
II environmental class, -10ºC÷40ºC
Dimensions (LxWxH)
81 x 77 x 26 [mm]
Mounting
mounting screws x2 (holes Ø 6mm)
Connectors:
- IN/OUT PoE
RJ45 8P8C
Net/gross weight
0,11kg / 0,15kg
Storage temperature
-20ºC...+60ºC
Declarations, warranty
CE, RoHS, 2 years from the production date
CAM 2
Data + supply
(max. 100m)
Data + supply
(max. 100m)
Data + supply
(max. 100m)
Data + supply
(max. 100m)
CAM 1
CAM 3
PoE IN
PoE OUT3
non-compliant
PoE
PoE
PoE
LAN
LAN
PoE Extender
EXT-POE3
PoE OUT2
PoE OUT1
LAN
LAN
OUT2
Power ON/OFF:
802.3af
802.3at
OUT1