User Instructions

www.pulsar.pl EN54C-LB8
2
Installation.
1) The module should be installed in the fixed section of the enclosure.
2) Connect AUX1 and AUX2 outputs with IN1 and IN2 inputs using the supplied cables.
3) The EXTi collective Power supply failure input should be connected to the output of the PSU terminal block.
When installing the fuse module in the power supply unit, power supply current consumption, used for the
calculation of standby time, should be considered.
Technical parameters.
Supply voltage
20 ÷ 30 V DC
Output voltage
U
AUX
= U
IN
(according to supply voltage )
Current consumption
20 ÷ 30mA @ Uin=20 ÷ 30 V DC
Number of power inputs
2 (IN1, IN2)
Number of power outputs
8 (AUX1 ÷ AUX8)
Protection:
- Short-circuit protection SCP
8 x F 0,5 A (it is possible to install F1 A fuses - not included)
Optical signaling of operation
L1 ÷ L8 - outputs condition AUX1÷AUX8 (green LEDs)
PSU - failure indication (red LED)
Fuses F1 ÷ F8
F0,5 A ÷ F1 A
PSU technical output
relay: 1 A@ 30 V DC/50 V AC
Operating conditions
2nd environmental class, -10°C ÷50°C
Dimensions (LxWxH)
150 x 52,5 x 27 [+/- 2mm]
Net/gross weight
0,12kg / 0,14kg
Storage temperature
-20ºC...+60ºC
Additional equipment
Screws x 2, glass fuses F0,5 A x 2
Pulsar sp.j.
Siedlec 150, 32-744 Łapczyca, Polska
Phone [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
WEEE Label
According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal
household waste.