User Instructions

www.pulsar.pl EN54C-LCD RED POWER plus
9
Fuses:
F
BAT
– fuse in the battery circuit,
F
AUX1
– fuse in the AUX1 output circuit,
F
AUX2
– fuse in the AUX2 output circuit,
The fuse values are given in table 12 – "Electrical parameters".
LEDs – optical indication:
230 V – voltage in the 230 V circuit
APS – battery failure
ALARM – collective failure
AUX1 – AUX1 output voltage (at the AUX1 connector)
AUX2 – AUX2 output voltage (at the AUX2 connector)
Battery temperature sensor
Battery connectors; positive: +BAT = red, negative: - BAT = black
LCD connector
Communication interface connector
Fig. 2. View of power supply module based on EN54C-2A7LCD.