User Instructions

www.pulsar.pl EN54C-LCD RED POWER plus
20
7. LCD display – preview
Table 3. Factory settings of PSU.
Indication time of EPS network loss
10s
section 8.2.2
Acoustic indication
1
section 8.2.3
Transmission
115.2k 8E1
section 8.2.4
Highlighting
Constant – 50%
section 8.3.4
Blinking light indicating failure
ON
section 8.3.6
Passwords:
– user’s
– installer’s
1111
1234
section 8.1
7.1. Control panel.
The PSU features a panel with buttons and LCD display, enabling reading of all the available electrical
parameters. The panel buttons are used to select and confirm the parameters, which should be displayed.
Fig. 14. Control panel.
Table 4. Description of buttons and LEDs of LCD panel.
– move cursor on display
– next screen selection
– selection approval
– leaving editing mode without changing values
– selection approval
– green LED indicating 230 V power
– green LED AUX1 indicating power at AUX1 output of PSU
– green LED AUX2 indicating power at AUX2 output of PSU
– yellow LED ALARM indicating collective failure