Operating instructions

Pulsar
®
The RS485-WiFi „INTRW” interface is a device used to convert signals between the RS485 bus and the WiFi
network. For proper operation, the unit requires an external power supply in the range of 10÷30V DC e.g. drawn from a PSU
of the EN54 series. The physical connection of the interface takes place under galvanic isolation. The unit is mounted in a
hermetic enclosure protecting against adverse environmental conditions.
The Wi-Fi communication using WI-FI „INTW” interface.
The The Wi-Fi communication using the RS485-WIFI „INTRW” interface.
The Wi-Fi wireless communication.
The Wi-Fi wireless communication can be implemented on the basis of additional interfaces: WI-Fi 'INTW' and
RS485-WiFi, operating within 2,4GHz frequency band, according to the IEEE 802.11 bgn standard.
The WiFi 'INTW' interface shall be mounted in a selected location inside the enclosure so that the antenna is
exposed to the outside.
10-30VDC
Interface
RS485-WiFi
“INTRW”
EN54/LCD series power supply unit
Power supply for fire alarm systems 27,6V DC
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail:[e-mail]