Operating instructions

www.pulsar.pl EN54-3A28 RED POWER
35
8.5. „PowerSecurity” program.
The ”Power Security” program is available on www.pulsar.pl
Its detailed description can be found in the manual.
„Power Security” is a free computer program developed to view and analyze the information sent from the
PSU installation spots. The main panel is presented below.
Fig. 21. „Power security” main panel.
It is possible to divide the main panel of the program into smaller areas, depending on the number of
monitored power supplies.
The program is equipped with manager mode, which allows the grouping of power supplies for easier
analysis and orientation.
The application enables both the visualization and analysis of the received data. Exceeding of the
acceptable parameters is indicated by red illumination of the appropriate area or by blinking of the indicator light.
Individual tabs allow to monitor the power supply parameters on the chart and failure memory along with the
information about the status of technical outputs and electrical parameters.