User Instructions

www.pulsar.pl EN54-3A17 RED POWER
35
W
H
D
- F
BAT
- F
AUX1
- F
AUX2
F 6,3 A / 250 V
F 5 A / 250 V
F 5 A / 250 V
Additional equipment
(not included)
- RS485 „INTR” interface; RS485 communication
- Ethernet „INTE” interface; Ethernet communication
- RS485-Ethernet “INTRE” interface; RS485-Ethernet
communication
Table 13. Mechanical parameters.
Enclosure dimensions
W=420 H=420 D+D
1
=102 + 8 [+/- 2mm]
W
1
=425 H
1
=425 [+/- 2mm]
Mounting
380 x 345 x Φ 6 x4 pieces (WxH)
Recommended battery model
- 2 x EP 17-12 or
- 2 x GP12170
Fitting battery
2x17 Ah/12 V (SLA) max.
400 x 180 x 95mm (WxHxD) max
Net/gross weight
8,3/ 9,4 kg
Enclosure
Steel plate DC01 1,2mm, color: RAL 3001 (red)
Closing
Key lock
Terminals
Mains supply: Ф0,51÷2 (AWG 24-12)
Outputs: Ф0,51÷2 (AWG 24-12)
Battery outputs BAT: Ф6 (M6-0-2,5)
Cable glands
PG9 – cable diameter Ф4÷8mm
PG11 – cable diameter Ф5÷10mm
Notes
The enclosure does not adjoin the mounting surface so that cables can be led.
Convection cooling.
Table 14. Safety of use.
Protection class EN 60950-1:2007
I (first)
Protection grade EN 60529: 2003
IP42
Insulation electrical strength:
- between input (network) circuit and the output circuits of the PSU
- between input circuit and protection circuit
- between output circuit and protection circuit
3000 V AC min.
1500 V AC min.
500 V AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500 V DC
Table 15. Recommended types and sections of installation cables.
Mains supply ~230 V L-N-PE
(see Table 2 [2])
OMY 3 x 0,75 mm
2
…1,5 mm
2
AUX1, AUX2 output terminals
(see Table 1 [11])
HLGs 2 x 1,5 mm
2
…2,5 mm
2
Indication inputs/outputs
(see Table 1 [11])
YnTKSY 1 x 2 x 0,8 mm
2
Additional indication lines (with optional interface)
FTP 4x2x0,5 cat. 5e