User Instructions

www.pulsar.pl EN54-3A17 RED POWER
33
Fig. 16. Ethernet network communication using the RS485 „INTRE” interface.
8.2. „PowerSecurity” program.
The ”Power Security” program is available on www.pulsar.pl
Its detailed description can be found in the manual.
„Power Security” is a free computer program developed to view and analyze the information sent from the PSU
installation spots. The main panel is presented below.
Fig. 17. „Power security” main panel.
It is possible to divide the main panel of the program into smaller areas, depending on the number of monitored
power supplies.
The program is equipped with manager mode, which allows the grouping of power supplies for easier analysis and
orientation.
The application enables both the visualization and analysis of the received data. Exceeding of the acceptable
parameters is indicated by red illumination of the appropriate area or by blinking of the indicator light. Individual tabs allow
to monitor the power supply parameters on the chart and failure memory along with the information about the status of
technical outputs and electrical parameters.