User Instructions

www.pulsar.pl
2
PSU features.
 Compliant with the requirements of the
EN 54-4:1997+AC:1999+A1:2002+A2:2006
and EN 12101-10:2005+AC:2007standards and
pt. 12.2 of the Regulation of the Minister of Interior and
Administration of the Republic of Poland of 20.06.2007
 Power supply for the call station of the DSO system, e.g.
the PVA-15CST and two PVA-20CSE extensions by
BOSCH
 24V DC Uninterruptible Power Supply
 Single battery power supply (7Ah /12V)
 Wide supply voltage range (176-264V AC)
 Low ripple voltage
 Microprocessor-based automation system
 Measurement of the resistance of the battery circuit
 Automatic temperature compensation of the battery
charging
 Battery test
 Two-phase battery charging
 The accelerated battery charging
 Battery electrical continuity control
 Battery voltage control
 Battery fuse status control
 Battery charge and maintenance control
 Deep discharge battery protection (UVP)
 Battery overload protection.
 Battery output protection against short-circuit
and reverse polarity connection
 Output voltage control
 Acoustic indication of failure
 Technical inputs/outputs with galvanic isolation
 Technical outputs - relay type.
 ALARM – technical output of collective failure
 EPS – technical output of 230V AC power
failure indication
 PSU – technical output of power supply failure
indication
 APS – technical output of battery failure
indication
 LED Optical indication.
 Protection types:
 SCP short-circuit protection
 OLP overload protection
 Convection cooling.
 Warranty - 3 year from the production date