Operating instructions

4
Table 2. (See Fig.3)
Component No
(Fig. 3)
Description
[1]
4 x PoE port (1÷4)
[2]
1 x UPLINK port
1.4 Technical parameters
- parameters of the switch (tab.3)
- electrical parameters (tab.4)
- mechanical parameters (tab.5)
- operation safety (tab.6)
- operating parameters (tab.7)
Table 3. Parameters of the switch
Ports
5 10/100Mb/s ports (4 x PoE + 1 x UPLINK)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af (1÷8 ports), 48V DC / 15,4W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
* The given value of 15,4W per port is the maximum value. The total power consumption should not exceed 40W when all PoE ports are being used.
Table 4. Electrical parameters
Mains supply
176÷264V AC
Current up to
0,6A@230VAC max.
Supply power
45W
Output current at the PoE ports (RJ45)
4 x 0,3A ΣI=0,8A (max.)
Output voltage at the PoE ports (RJ45)
48VDC „+ ”4, 5 „- ” 7, 8
Short-circuit protection SCP and overload protection OLP
180% ÷ 200% PSU power, manual restart (the fault requires
disconnection of the DC output circuit)
PSU current consumption
0,3A
Battery charge current
0,5A max. @1x7Ah (+/-5%)
Battery circuit protection SCP and reverse
polarity connection
glass fuse
Deep discharge battery protection UVP
U<9,5V (± 5%) – disconnect of connection battery
Table 5. Mechanical parameters
Enclosure dimensions
250 x 110+8 x 180+12 [mm] (WxHxD)
Mounting
For DIN rail TH35
Gross/Net weight
2,68 / 2,77 kg
Enclosure
Steel plate, DC01 1,0mm color black RAL 9005
Connectors
Power supply of the cameras: RJ45 socket
battery output BAT: 6,3F-2,5
Power input: Φ 0,51-2,59 (AWG 24-10)
Notes
The enclosure does not touch the assembly surface so that cables can be led.
Table 6. Operation safety
Protection class PN-EN 609501:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500V/DC
Declarations
CE