Data Sheet

wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Pulsar
®
Buffer, switch mode power supply unit 13,8V/DC, without automatic operation control
Pulsar
®
Power supply series DINB
Buffer power supply 27,6V DC on a DIN rail
SPECIFICATIONS:
Supply voltage 90÷264V AC
Current consumption 0,6A@230VAC max.
PSU power 60W max.
Efficiency 88%
Output voltage 23V÷ 27,6V DC – buffer operation
20V÷ 27,6V DC – battery operation
Output current
2A + 0,2A battery charging
Ripple voltage 100mV p-p max.
Battery charging current 0,2A max.
Short-circuit protection SCP F2 – melting fuse (failure requires fuse replacement)
Overload protection OLP 150-200% of PSU power supply, automatic recovery
Surge protection varistors
Deep discharge battery protection UVP U<20V (+/- 0,5V) – disconnection of the battery terminal
LED indication: Yes - LEDs
F1 fuse T 3,15A / 250V
F2 fuse F 2A / 250V
Operating temperature 2nd environmental class, temperature: -10°C ÷40°C,
relative humidity: 20%...90%, without condensation
Dimensions L=122, W=93, H=50 [+/- 2mm]
Mounting TH35 DIN rail
Net/gross weight 0,37 kg/ 0,45 kg
Enclosure ABS, RAL9003, light grey
Connectors Φ0,51-2,05 (AWG 24-12)
Declarations, warranty CE, 2 year from the production date