DINB 13830 v.1.0 DINB 13,8V/3A DIN rail buffer power supply. EN** Edition: 5 from 06.08.2018 Supersedes the edition: 4 from 03.06.
www.pulsar.
www.pulsar.pl DINB13830 1.3 Description of components and power supply connectors (Table 1, Fig.2). Table 1. The components of power supply. Component No. [1] [2] [3] [4] [5] Description F1 fuse in the power supply circuit (230V/AC) L-N power connector 230V AC, protective connector PE +OUT- DC power output +BAT- battery connector F2 fuse in the output circuit +OUT, F 3A / 250V LED optical indication: AC – AC voltage indication DC – DC voltage indication BAT – battery charging indication Fig. 2.
www.pulsar.pl DINB13830 2.2 Installation procedure. 1. Before installation, make sure that the voltage in the 230V power-supply circuit is cut off. 2. Mount the power supply module on a DIN rail. 3. Connect the power cables to the L-N terminals of the PSU. Connect the ground wire to the terminal marked with the PE symbol. Use a three-core cable (with a yellow and green protection wire) to make the connection.
www.pulsar.pl DINB13830 WEEE MARK According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such WEEE separately. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law. Pulsar Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl, sales@pulsar.
