User Instructions
1
DCDC10H
12V/1A/55MM DC/DC converter
PL
Edition: 6 from 14.02.2019
Supersedes edition: 5 from 10.06.2014 EN
Features:
Power output 1 A/12 V DC*
DC power supply range 18÷40 V DC
high efficiency 87%
IP 67 enclosure
protections:
against short circuit protection SCP
overload protection OLP
against reverse input voltage polarity
warranty – 2 year from the production date
1. Technical description.
1.1. General description.
The DCDC converter is used for powering devices that require stabilized voltage of 12 V DC. The maximum current
load is 1 A* (Pmax= 12 W). This module does not have galvanic insulation between the input and output (IN-AUX), and
operates on a common ground potential. The unit is protected against short circuit, overload and against reverse input
voltage polarity.
1.2. Specifications.
Supply voltage
18 ÷ 40 V DC
Supply power
12 W max.
Efficiency
87 %
Output voltage
12 V DC
Current consumption by converter systems
10 mA max.
Output current t
AMB
<30 °C
1 A - refer to chart 1.
Output current t
AMB
=40 °C
0,7 A - refer to chart 1.
Ripple voltage
100 mV p-p max.
Protection against short circuits (SCP) and overloads
(OLP)
200 % ÷ 400 % of module power – output power limit, automatic
return after elimination of short circuit
IP protection class
IP67
Operating conditions
temperature -10
o
C÷40
o
C
relative humidity 20 %...90 %
Dimensions (LxWxH)
50 x 48 x 25 [mm]
Net/gross weight
0,10 kg / 0,13 kg
Length of DC input cable
0,3 m
Length of DC output cable
0,5 m + plug DC5,5/2,1 female
Storage temperature
-20 ºC...+60 ºC
* In order to extend the life of the converter, the load current of 0,7 A is recommended.
Chart 1.
Relation between output current and ambient
temperature (instantaneous load).
Fig.1. Mechanical view and dimensions of the converter.
* Refer to chart 1