User Instructions

www.pulsar.pl Seria AWZG2
2
Features:
 compliance with norm EN50131-6:2017 in grade 1,2
and II enviroment class
 compliance with norm EN60839-11:2013 in grade
1,2 and II enviroment class
 supply voltage ~230 V
 DC 13,8 V or 27,6 V uninterruptible power supply
 available versions with space for 7 Ah – 40 Ah
batteries
 available versions with current efficiencies:
o 13,8 V: 2A/3A/5A
o 27,6 V: 2A/3A
 microprocessor-based automation system
 dynamic battery test
 battery circuit continuity control
 battery voltage control
 battery fuse status control
 battery charging and maintenance control
 deep discharge battery protection (UVP)
 battery output protection against short circuit and
reverse connection
 battery charging current jumper selectable
 START function of manual switch to battery power
 LED optical indication
 START facility for manual battery connection
 APS technical output indicating battery failure
– OC type
 optional module AWZ639 changing OC outputs into
relay outputs
 protections:
o SCP short-circuit protection
o OLP overload protection
o against sabotage: unwanted enclosure
opening
 warranty – 5 years from the production date
Table of contents:
1. Technical description.
1.1. General description
1.2. Block diagram
1.3. Description of components and connectors
1.4. Specifications
2. Installation.
2.1. Requirements
2.2. Installation procedure
3. Operating status indication.
3.1. Optical indication
3.2. Technical outputs
3.3. Technical outputs – relay.
3.4. Standby time
3.5. Battery charging time
3.6. Running PSU on battery backup
4. Operation and use.
4.1. Overload or short circuit of the PSU output (SCP on)
4.2. Dynamic battery test
4.3. Maintenance.
1. Technical description.
1.1. General description.
The buffer power supply is designed in accordance with the requirements of the (I&HAS) EN50131-6:2017
and (KD) EN60839-11:2013 standard, grade 1÷2 and II environmental class. The power supplies unitsare
intended for for an uninterrupted supply of I&HAS i KD devices requiring stabilized voltage of 12 V or 24 V DC
(±15%).
Displaying parameters of the power supply:
PSU’s name
Output voltage
Output current max.
Output current (in standby
mode for grade 2 EN50131-6,
EN60839-11)
AWZG2-12V2A-B
13,8 V
2 A
0,58A
AWZG2-12V3A-C
13,8 V
3 A
1,41A
AWZG2-12V5A-C
13,8 V
5 A
1,41A
AWZG2-12V5A-D
13,8 V
5 A
3,33A
AWZG2-24V2A-B
27,6 V
2 A
0,58A
AWZG2-24V3A-C
27,6 V
3 A
1,41A
Total current of the receivers + battery charging current mustn’t cross maximum current of power supply.