Data Sheet

AWZ634 v.1.0/I
Battery controller 48VDC/5A
CODE
TYPE
:
:
DESCRIPTION
The AWZ63 battery controller is designed for monitoring the status of the (Capacity: (SLA))
4 batteries pack based on the measurements of resistance, continuity of the batteries circuit, voltage and the
charge level. It is also protected against reverse connection and short circuit in the charging circuit. In the case of
failure, a LED light is activated, which is accompanied by switching of relay contacts and acoustic indication.
4 4x 7÷18Ah/12V
EN
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Battery controller 48VDC
The battery controller features:
· Microprocessor-based automation system
· Automatic battery test every 5min.
· The measurement of the resistance of the battery
circuit
· Monitoring of the continuity of the battery circuit
· Battery Detection
· Low battery voltage indication - DC operation
· Battery output protection against short-circuit and
reverse polarity connection
· Batteries compartment for 4x 7÷18Ah/12V
(SLA) batteries
· Technical output of failure - relay type
· Optical indication of failure (LED)
· Acoustic indication of failure
· "Test" button is at the front panel
· Designed to operate with a 54V uninterruptible
power supply unit
· Warranty: 2 years from the production date
Pulsar
®
W
W
1
L
H