AWZ633 v.1.0 Battery controller 24VDC/10A EN Edition: 1 from 22.10.
www.pulsar.pl AWZ633 The battery controller features: Batteries compartment for 2x 7÷40Ah/12V (SLA) batteries Technical output of failure - relay type Optical indication of failure (LED) Acoustic indication of failure "Test" button is at the front panel Designed to operate with a 27,6V uninterruptible power supply unit Warranty: 2 years from the production date Microprocessor-based automation system Automatic battery test every 5min.
www.pulsar.pl AWZ633 1. Technical description. 1.1. General description. The AWZ633 battery controller is designed for monitoring the status of the (Capacity: 7÷40Ah/12V (SLA)) 2 batteries pack based on the measurements of resistance, continuity of the batteries circuit, voltage, and the charge level. It is also protected against reverse connection and short circuit in the charging circuit.
www.pulsar.pl AWZ633 Fig. 2. General view. 1.4. Technical parameters. - Electrical parameters (Table 2) - Mechanical parameters (Table 3) - Operation safety (Table 4) - Operation parameters (Table 5) Electrical parameters (Table 2).
www.pulsar.pl AWZ633 Operation parameters (Table 4) Environmental class Operation temperature Storage temperature Relative humidity Sinusoidal vibrations during operation: Surges during operation Direct insolation Vibrations and surges during transport II -10ºC...+40ºC -20ºC...+60ºC 20%...90%, no condensation Unacceptable Unacceptable Unacceptable According to the PN-83/T-42106 standard 2. Mounting. 2.1. Requirements.
www.pulsar.pl AWZ633 Table 6.
