User Instructions

AWZ622
v1.0
P1
Relay module
Edition: 2 from 01.03.2018
Supersedes the edition: 1 from 12.12.2016
EN
1. Intended use.
The P1 (AWZ622) relay module is to be used in low-voltage installations. It is intended for controlling and
status indication in e.g. alarm or access control systems. It may be used to control devices of high power consumption
via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the
outputs of the module.
2. Description of the module.
2.1 Description of components and connectors of the
module.
3. Specifications
Element
no. [fig. 1]
Description
[1]
+IN- module’s power input
[2]
Relay contacts:
COM – inputs of the voltage that control the
relay
NO - normally open relay’s contact
NC - normally closed relay’s contact
Supply voltage
module
12V (10V DC÷14V DC)
Current
consumption
20 mA max.
Number of relays
1
Voltage of the
relay’s contacts
30V DC / 50V AC max.
Current of the
relay’s contacts
1A max.
Operating
conditions
2nd environmental class -10°C÷ 50°C
Dimensions
L=30, W=27, H=18 [mm, +/-2]
Net/gross weight
0,02 / 0,03 [kg]
Installation
installation tape
Declarations,
warranty
CE, 2 year from the production date
Notes
leads on connections: Ø 0,41÷1,63 (AWG
26-14), 0,2÷1mm
2
Fig.1. Drawing of the module.
Fig.2. Electrical diagram.
WEEE PARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste
and to collect such WEEE separately.
Pulsar
Siedlec 150, 32-744 Łapczyca, Polska
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl