Operating instructions

AWZ514
v.2.1
PU1/HV
Relay module
Edition: 4 from 01.03.2013
Supersedes the edition : 3 from 03.12.2010
EN
1. Intended use.
The PU1/HV (AWZ514) relay module is to be used in low-voltage installations. It is intended for controlling and status indication in
e.g. alarm or access control systems. It may be used to control devices of high power consumption via OC outputs of alarm
systems. Moreover, it ensures galvanic isolation of signals, power sources relating to the outputs of the module.
2. Installation.
The module is equipped with a plastic panel with self-adhesive tape that enables fixing it to a flat surface (side panel of an
enclosure, a buffer PSU, etc.) and holes for bolting the panel to the mounting surface.
3. Description of the module.
3.1 Components.
3.2 Connectors.
4. Specifications.
Fig. 1. General view of the module.
5. Electrical diagram.
-I+ inputs of the voltage that control the relay
C – common terminal of the relay
NO – normally open relay’s contact
NC – normally closed relay’s contact
1 – module’s input terminals
2 – LED (indicates relay’s operations)
3 – relay
4 – fuse
5 – relay’s output terminals
Voltage of the relay’s coil 10÷16V DC/AC (-/+5%),
Current of the relay’s coil 33mA@12VDC
Resistance of coil 360 OHM (-/+10%)
Power of coil 400mW
Number of relays 1
Voltage of the relay’s contacts 30VDC / 250VAC max.
Current of the relay’s contacts
6A max.
Contacts of relay C/NC/NO (leads Φ2.05 mm: AWG 24-12)
ON/OFF time 15ms/8ms (-/+5%)
Operating conditions 2nd environmental class, -10°C÷ 40°C
Enclosure open-frame design, IP00
Dimensions W=70, L=43, H=23 [mm, +/-2]
Net/gross weight 0,04 / 0,06 [kg]
Installation: installation tape or installation bolt x2
Declarations, warranty CE, RoHS, 2 year from the production date
Notes
leads on connections:Ø 0,41÷1,63
(AWG 26-
14),
Ø 0,51÷2,05 (AWG 24-12) - relay contacts
WARRANTY
Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year
warranty for the equipment, counted from the device’s production
date.
WEEE
PARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste
and to collect such WEEE separately.
Pulsar K.Bogusz Sp.j.
Siedlec 150, 32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
5
-/ /- + I +
NC NO C
REL
1
2
3
4