Data Sheet

Relay module
DC power
AWZ 513 v2.0/IV
PK1 relay module
CODE:
NAME:
DESCRIPTION
The PK1 (AWZ513) relay module is to be used in low-voltage installations. It is intended for controlling
and status indication in e.g. alarm or access control systems. It may be used to control devices of high power
consumption via OC outputs of alarm systems. Moreover, it ensures galvanic isolation of signals, power
sources relating to the outputs of the module. It features a serial fuse in the circuit of the relay (C, NO, NC).
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail:[e-mail]
Pulsar
®
EN
SPECIFICATIONS
Voltage of the relay’s coil
10÷14V DC (-/+5%),
Current of the relay’s coil
25mA@12VDC
Number of relays
1
Voltage of the relay’s contacts
30VDC / 50VAC max.
Current of the relay’s contacts
2A max.
Contacts of relay
C/NC/NO (leads Φ2.05 mm: AWG 24-12)
ON/OFF time
15ms/8ms (-/+5%)
Fuse
F1=2A, F2=0,5A
Operating conditions
2nd environmental class, -10°C÷ 40°C
Enclosure
open-frame design, IP00
Dimensions
L=70, W=43, H=20 [mm, +/-2]
Net/gross weight
0,03 / 0,05 [kg]
Installation:
installation tape or installation bolt x2
Declarations, warranty
CE,2 year from the production date
Notes
leads on connections:Ø 0,41÷1,63 (AWG 26-14),
Ø 0,51÷2,05 (AWG 24-12) - relay contacts