User Instructions

ManualsBrandsPulsar Manuals13AWZ 13,8V/1A/1,2Ah/L buffer, linear power supply unit

AWZ 100

v.2.4

AWZ 13,8V/1A/1,2Ah/L

Linear, Buffer Power Supply Unit

EN**

Edition: 7 from 15.05.2014

Supercedes the edition: 6 from 13.02.2014

Summary of content (8 pages)

PAGE 1
AWZ 100 v.2.4 AWZ 13,8V/1A/1,2Ah/L Linear, Buffer Power Supply Unit EN** Edition: 7 from 15.05.2014 Supercedes the edition: 6 from 13.02.
PAGE 2
www.pulsar.
PAGE 3
www.pulsar.pl GREY POWER AWZ100 1.2 Block diagram (Fig. 1). Fig. 1. Block diagram of the PSU. 1.3 Description of PSU components and connectors. Table 1. Elements of the PSU pcb (see Fig. 2). Element no.
PAGE 4
www.pulsar.pl GREY POWER AWZ100 Table 2. Elements of the PSU (see Fig. 3.) Element no. Description [1] Isolation transformer [2] Pcb of the PSU (Tab. 1, Fig. 2) [3] TAMPER – microswitch (contacts) of antisabotage protection (NC) [4] FMAIN fuse in the battery circuit (230V/AC) [5] [6] L-N 230V/AC power supply connector, PE protection connector Battery connectors +BAT = red, - BAT = black Fig. 3. The view of the PSU. 1.4 Specifications: - electrical specifications (tab.
PAGE 5
www.pulsar.
PAGE 6
www.pulsar.pl GREY POWER AWZ100 2. Installation 2.1 Requirements The buffer PSU is to be mounted by a qualified installer, holding relevant permits and licenses (applicable and required for a given country) for 230V/AC and low-voltage installations. The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal relative humidity (RH=90% maximum, without condensing) and temperature from -10°C to +40°C.
PAGE 7
www.pulsar.pl GREY POWER AWZ100 3. Operating status indication. 3.1 LED indication The PSU is equipped with two diodes in the front panel. RED LED:  on – the PSU is supplied with 230V AC  off – no 230V AC supply GREEN LED:  on – DC voltage in the DC output of the AUX  off – no DC voltage in the DC output of the AUX 3.2 Technical output: The PSU is equipped with technical output: TAMPER - output indicates opening the power-supply unit.
PAGE 8
www.pulsar.pl GREY POWER AWZ100 WEEE MARK According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such WEEE separately. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law. Pulsar sp. j. Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.