User Instructions

1. Mount the transformer on DIN holder (use screw, bolt).
2. Mount the transformer with DIN – TH35/TS35.
3. Supply conductors ~230V should be connected to 230V / AC L-N terminals of transformer.
4. Connect the output transformer to a device, using installed cables
Remarks: make other connections required for the correct type of device.
5. If necessary, make other connections required for the correct type of system / device.
Remarks: consistent with requirements and recommendation of the producer.
6. Start the system (switch on ~230V), adjust or configure: according to procedure of the producer’s
system.
3. Parametry techniczne / Technical data:
PARAMETRY TECHNICZNE / TECHNICAL DATA
Kod / Code
Nazwa/ Name
Wymiary / Dimensions
W x H x D
[mm] (+/- 2mm)
Waga (netto / brutto)
Weight (net / gross)
[kg]
Uwagi / Notes
AW0 466
Uchwyt/holderDIN
TRP/TRZ
20-40VA
95 x 125 x 25
0,11 / 0,13
stal
steel
AWO467
Uchwyt/holder DIN
TOR/TRP/TRZ
50-150VA
125 x 137 x 25
0,15 / 0,18
4. Przykładowy montaż / Sample mounting:
PRODUCENT / PRODUCER
Pulsar
Siedlec 150, 32-744 Łapczyca, Poland
Tel. (+ 48) 14-610-19-40, Fax. (+ 48) 14-610-19-50
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl